Yes, you can tow a small pop-up camper with your 2004 Pontiac Grand Prix GT1, as long as the camper does not weigh more than 3,500 lbs. loaded.
But, you will always want to check the owners manual or with the dealer for the gross towing weight capacity of your 2004 Pontiac Grand Prix GT1 to make sure the towing capacity is not exceeded.
The Curt 1-1/4 Inch Class II Hitch, # C12225, would be a recommended hitch for your vehicle. It is a Class II hitch which has a 3,500 lbs. towing weight... view full answer...
When flat towing a vehicle, there are 5 main components that are needed. Starting with base plates, the 2000 Grand Am will need Roadmaster Base Plates # 194-3. To install this you will need moderate mechanical skills and aptitude. It is hard to say exactly a numerical value for how difficult it would be to install this product, but I am confident that if you have access to basic tools you could accomplish this install. I am going to send you the installation instructions for this product... view full answer...
To mount the SportRack Skyline XL roof cargo box SR7095 on the roof of your 2000 Pontiac Grand Am would require a roof rack installed with crossbars that are spaced 21-1/2 inches apart. Since the roof racks for your vehicle like the Inno Rack part # INB117, # INSUT, # INJK, and # INK153 have a wider bar spacing of 28 inches this would not be the box to go with. So instead for a similar sized box that would fit you'd want the SportRack box part # SR7016 which would work really well. It's... view full answer...
I am assuming you are looking for the shank that your Blue Ox tow bar attaches to. We do offer several. In researching tow bars and how they are attached, the end of the tow bar that attaches to the base plates should not exceed a rise or drop of 3 inches from the center of the RV hitch receiver.
I recommend the Roadmaster High-Low Hitch Adapter, part # RM-048-6. This adapter measures 9-1/2 inches from the center of the hitch pin hole to the pin hole on the receiver, and has a 6 inch... view full answer...
If you have a 1999 Pontiac Grand Am SE you will need the Roadmaster XL Base Plate Kit, item # 194-3,
You will need a tow bar to go with the XL base plate kit and I would recommend the RoadMaster Falcon 2 Tow Bar, item # RM-520, which will slide into the receiver on your RV. Wiring can be done in several ways, I would recommend the using the RoadMaster Tail Light Wiring Kit with Bulbs, item # RM-155, if there is space in the taillights to mount the extra bulbs. This system uses the vehicle... view full answer...
First you will need to start with a base plate kit for your 2004 Pontiac Grand Am. If you have an SE model you would need the part # 194-3, if you have a GT you would need the part # BX3227.
In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. The most popular compatible tow bar is the Falcon 2, # RM-520. For safety cables you can use # RM-643. The coiled design helps keep the cables off of... view full answer...
We have exactly what you need for your 2005 Pontiac Grand Am. For trailer wiring you would want the part # 119178KIT.
This harness is designed to take separate taillight signals like what you have on your vehicle and convert them to combined so that it will work with the standard style of trailer wiring. view full answer...
All of the trailer hitches available for the 2001 Pontiac Grand Am are Class II hitches with 1-1/4 inch receivers (see link). Hitch # C12040 fits all models. I have included a link to the installation instructions for you.
The Yakima HoldUp, # Y02433 only fits 2 inch trailer hitch receivers so it will not be compatible with the hitches for your Grand Am. There is a 1-1/4 inch version though, # Y02434. view full answer...
Go To Results